A SERVICE OF

logo

Open as PDF
next previous
Basic Operation
3-20
Sleep Mode
To activate Sleep mode, press the Power key.
On the operation panel, only the Main Power indicator
will remain lit.
The copier will use much less power than Low-Power
mode.
To resume copying, press the Power key again. The
copier will be ready to copy in 30 seconds.
NOTE: If the copier receives print data in Sleep mode
through an optional printer unit, it will automatically
return and process the job.
Auto Sleep mode
In Auto Sleep mode, the copier automatically switches to Sleep mode if left idle for a preset period.
The default period for Auto Sleep mode is 90 minutes.
NOTE: You can adjust the period for Auto Sleep mode. Refer to Chapter 3 of the Advanced
Operation Guide.