7
Using PageScope Web Connection
7-16 IC-205
Using PageScope Web Connection Chapter 7
7.13 Resetting the network interface card and image con-
troller
The network interface card and image controller can be restarted.
How to reset the network interface card and image controller
In order to reset the network interface card and image controller, you must
be logged in to the administrator mode.
1 Log in to the administrator mode.
2 Click [Maintenance] in the menu on the “System” tab.
3 Click [NIC and Printer Controller Reset] in the sub-menu that appeared.
4 Click the [Reset] button.
5 In the confirmation dialog box that appeared, click the [Yes] button.
To stop resetting, click the [No] button.
2
Note
Job being processed are not saved when the reset operation is per-
formed.
