55
MANUAL SEARCH (DVB-T) TERRESTRIAL
SEARCH FOR CHANNELS
Use the
buttons to select which channel/frequency you want to cover with a search. Change to
“Frequency” using the
buttons. If the required frequency is not included in the selection in the fi rst
“Frequency” line, you can enter the frequency manually using the number pad buttons. Use the
buttons to switch to “Network search” and use the
buttons to select whether the additional
transmission channels, not yet saved, found due to the networking of the transmission channels
are also be searched for new channels.
Using the
buttons switch to “Channels to search for” and select whether you want to search
only for free-to-air channels, only for encrypted channels or for all channels using the
buttons.
Once you have made all the settings, switch to the last line and start the search using the
button.
The displays once the search is complete are identical to those for the automatic search.
