69
English
Manufacturers’ codes for VCR
❏ Changing the transmittable signals for operating a
VCR
1
Press and hold VCR .
2
Press VCR.
3
Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4
Release VCR .
Now, you can perform the following operations on the VCR.
VCR : Turn on or off the VCR.
After pressing VCR (source selecting button), you can perform
the following operations on the VCR.
CHANNEL +/–: Change the channel numbers on the
VCR.
1 – 9, 0: Select the channel numbers on the
VCR.
3: Start playback.
7: Stop playback.
8: Pause playback. To release it, press
3.
¡: Fast-wind a tape.
1: Rewind a tape.
5
Try to operate your VCR by pressing VCR .
When your VCR turns on or off, you have entered the
correct code.
If more than one codes are listed for your brand of VCR, try
each one until the correct one is entered.
Operating other manufacturers’ equipment
❏ Changing the transmittable signals for operating a
TV
1
Press and hold TV .
2
Press TV.
3
Enter the manufacturer’s code using buttons 1 – 9,
and 0.
4
Release TV .
Now, you can perform the following operations on the TV.
TV : Turn on or off the TV.
TV VOL +/–: Adjust the volume.
TV/VIDEO: Change the input mode (either TV
or VIDEO).
After pressing TV (source selecting button), you can perform
the following operations on the TV.
CHANNEL +/–: Change the channel numbers.
1 – 9, 0: Select the channel numbers.
5
Try to operate your TV by pressing TV .
When your TV turns on or off, you have entered the correct
code.
If more than one codes are listed for your brand of TV, try
each one until the correct one is entered.
Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
Manufacturer Codes
JVC 01*
AKAI 02
BELL+HOWELL 03
CENTURION 04
CORONAD 05
DAEWOO 06 – 08
EMERSON 09 – 13
FISHER 14
GE•PANA 15, 16
GE•RCA 17
GOLD STAR 18, 19
HITACHI 20, 21
KTV 22, 23
MAGNAVOX 24
MARANTZ 25
MITSUBISHI 25
PANASONIC 26, 27
PHILIPS 24
PIONEER 28
PROSCAN 29
QUASAR 30
RADIOSHACK 31
RCA 02, 17, 32 – 35
SAMSUNG 36, 37
SANYO 14
SEARS 38
SHARP 39
SONY 40
SYMPHONIC 41, 42
TOSHIBA 38
ZENITH 43,44
* Initial setting
Manufacturers’ codes for TV
Manufacturer Codes
JVC 01* – 04
AIWA 05
AKAI 06 – 08
BELL+HOWELL 09
DAEWOO 10
EMERSON 11 – 15
FISHER 16 – 19
G.E. 20, 21
GO VIDEO 22
GOLD STAR 23
GO-VIDEO A 24
GO-VIDEO B 25
HITACHI 20, 26
MAGNAVOX 27 – 29
MITSUBISHI 30 – 33
NEC 34, 35
PANASONIC 36, 37
PHILIPS 27
RCA 38
SAMSUNG 39 – 41
SANYO 16 – 19
SCOTT 42
SHARP 43, 44
SHINTOM 45
SONY 46 – 51
SYMPHO 52
TEKNICA 53, 54
TOSHIBA 55
ZENITH 56
* Initial setting
EN65-69RX-ES1&XV-NK58[UW]f 03.5.16, 16:4269
