21
EN
Using an SD Card
•
Operations are confirmed on the SD cards
from the following manufacturers.
- Panasonic
- TOSHIBA
- SanDisk
- ATP
Video recording:
Class 4 or higher compatible SDHC card
(4 GB to 32 GB)
•
For UXP mode, use Class 6 or higher.
Still image recording:
SD card (256 MB to 2 GB) or SDHC card
(4 GB to 32 GB)
•
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
•
MultiMediaCards are not supported.
•
Video data may not be recorded onto the
SD cards on which video data have already
been recorded using the devices from other
manufacturers.
Insert an SD card
Preparation:
Close the LCD monitor to turn off the camera.
1 Open the SD card cover.
2 Firmly insert the card with its clipped
edge first.
3 Close the SD card cover.
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
NOTE
•
Insert and remove the SD card only while the
power is turned off. Otherwise, data on the
card may be corrupted.
•
Do not touch the terminal on the reverse side
of the label.
Format an SD card when using it for the
first time
Select [FORMAT SD CARD] to format the
card. (Z p. 72)
