9
3 [BF LOCK] Back focus locking screw (× 2: 2 mm)
This serves to fix the back focus-adjusting ring.
4 Camera-mounting bracket
The bracket has been attached on the bottom of the camera
before shipment. It can also be attached on the top according
to the circumstance.
To re-attach the bracket use the threaded holes at the top, with
the camera mounting bracket locking screws 7.
5 Camera-mounting screw hole (1/4 inch)
Use this hole when mounting the camera
onto a fixer, pan/tilt unit, and the like.
(Use a screw shorter than 7 mm.)
(੬ Page 18)
6 Rotation prevention hole
Make use of this rotation-preventive hole to prevent any fall
when mounting the camera. Make sure that the camera is se-
curely mounted.
7 Camera mounting bracket fixing screws (× 2: M2.6 × 6 mm)
Be sure to use a 6 mm long screw.
Names and Operations of Parts
MAX.
7mm
