Creating realistic sound fields
31
The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.
On the remote control:
7
When playing back digital multichannel software
The appropriate multichannel surround mode is automatically
activated.
“DOLBY D”: When a software encoded with Dolby Digital is
played back
“DTS”: When a software encoded with DTS Digital
Surround is played back
In these cases, you can only turn on or off (“SURR OFF”) the
surround mode.
7
When playing back 2 channel source
You can select either mode of Dolby Pro Logic II (PL II MOVIE/
PL II MUSIC) or one of the DSP modes (LIVE CLUB/DANCE
CLUB/HALL/PAVILION/ALL CH ST.).
Press SURR-MODE.
The surround mode is turned on and the current surround mode
appears on the display window.
Each time you press the button, the surround mode changes as
follows;
]
PL II MOVIE
]
PL II MUSIC
]
LIVE CLUB
]
DANCE
CLUB
]
HALL
]
PAVILION
]
ALL CH ST.
]
(back to the
beginning)
For details on each mode, see pages 29 and 30.
To turn off the surround mode
Press SURR-ON/OFF.
Each time you press the button, the surround mode turns on and off
alternately.
SURR OFF (surround off)
O
current selected mode
(surround on)
• When selecting “PL II MUSIC”, “PL II MOVIE”, “DOLBY D” or
“DTS” as the surround mode, the SURROUND indicator lights.
• When selecting one of the DSP modes (“LIVE CLUB”/“DANCE
CLUB”/“HALL”/“PAVILION”/“ALL CH ST.”) as the surround
mode, the DSP indicator lights.
• For Dolby Digital 2 channel software, you can select “PL II MUSIC”
or “PL II MOVIE”.
Storing adjustments — auto memory
This system memorizes the surround mode settings for each source.
• When you turn the power off:
When turning the power on again, the memorized settings for the
current source are automatically recalled.
• When you change the source:
The memorized settings for the newly selected source are
automatically recalled.
• If the source is FM or AM, you can assign a different setting for each
band.
Using the surround mode
TH-A85-55[A].book Page 31 Tuesday, May 27, 2003 10:24 AM
