22
PD-42/35DX(ASIA) / LCT1373-001A / English
ENGLISH
Teletext function
Basic operation
1 Choose a TV channel with a teletext broadcast
2 Set the VCR P
PP
P DVD switch to the
P
PP
P
(Text)
position
3 Press g
gg
g (Text) button to display the teletext
Pressing g (Text) button changes the mode as follows:
4 Choose a teletext page by pressing the 6
66
6
buttons, Number buttons or Colour buttons
To return to the TV mode:
Press the b button or g (Text) button.
• If you have trouble receiving teletext broadcasts,
consult your local dealer or the teletext station.
• The ZOOM function will not operate in the TV and
text mode or Text mode.
• No menu operations are possible when viewing a
teletext programme.
• Language display depends on the country which was
set on the TELETEXT LANGUAGE menu. If
characters on a Teletext programme do not appear
properly, change the TELETEXT LANGUAGE
Setting to other country’s. For detail, “Changing the
TELETEXT LANGUAGE setting” on page 37.
When viewing a teletext programme, the text
periodically moves a little at a time towards either the
top or bottom of the screen. This is to prevent burn-in
and is not a malfunction.
Using the List Mode
You can store the numbers of your favourite teletext pages
in memory and call them up quickly using the colour
buttons.
To store the page numbers:
1Press M
MM
M button to engage the List mode
The stored page numbers are displayed at the bottom of
the screen.
2 Press a Colour button to choose a position.
Then press the Number buttons to enter the
page number
3 Press and hold down P
PP
P button
The four page numbers blink white to indicate that they
are stored in memory.
To call up a stored page:
1Press the M
MM
M button to engage the List
mode
2 Press a colour button to which a page has been
assigned
To exit the List mode:
Press the M button again.
Hold
You can hold a teletext page on the screen for as long as
you want, even while several other teletext pages are being
received.
Press the N
NN
N button
To cancel the Hold function:
Press N button again.
• The Hold function is cleared if no operation is performed
for approximately one minute.
FREEZE
SUB-P
D1043
TV mode TV and text mode
Text mode
Hold indication
PD-42&35DX_Eng.book Page 22 Tuesday, January 28, 2003 5:39 PM
