A SERVICE OF

logo

EN65
Controls
1 Diopter Adjustment Control ................ pg. 14
2 Lens Cover Open/Close Ring............... pg. 16
3 Video Light Switch
[LIGHT OFF/AUTO/ON]..................... pg. 21
4 Snapshot Button [SNAPSHOT] ............ pg. 24
5 •Power Zoom Lever [T/W] ................. pg. 20
•Speaker Volume Control [VOL.] ....... pg. 40
6 Picture Stabilizer Button
[P.STABILIZER].................................... pg. 20
7 Fast-Forward Button [
3
, FF] .............. pg. 40
8 Rewind Button [
2
, REW].................. pg. 40
9 Stop Button [5, STOP] ........................ pg. 40
0 Play/Pause Button
[
4
/6, PLAY/PAUSE]............................ pg. 40
! •Select Dial [+, , PUSH] ............. pg. 11, 26
•Bright Dial ....................................... pg. 19
@ MENU/DISPLAY Button ................ pg. 17, 26
# Recording Start/Stop Button................. pg. 16
$ Power Switch ............................... pg. 16, 40
% Battery Release Switch
[BATTERY RELEASE] ........................... pg. 8
^ Monitor Open Button ......................... pg. 12
& OPEN/EJECT Switch ............................ pg. 12
Connectors
* DC IN Jack ......................................... pg. 9
The connectors ( to r are located beneath the
cover.
( Video Output Connector..................... pg. 44
) Audio Output Connector [L] ............... pg. 44
q Audio Output Connector [R] ............... pg. 44
w External Stereo Microphone Input Connector
[MIC]
If an optional microphone is connected, the built-
in microphone is disabled.
e S-Video Output Connector [S OUT] .... pg. 44
r J Terminal [JLIP (Joint Level Interface Protocol)
Connector] ......................................... pg. 53
•Connect the editing cable when performing
Random Assemble Editing ( pg. 52 – 57).
•It is used to connect the camcorder to a device
such as a personal computer.
For further details consult your nearest JVC
dealer.
•JLIP-controlled editing from camcorder to VCR
is not possible if the VCR is not equipped with a
J terminal.
Indicators
t Tally Lamp .......................................... pg. 16
y Power Lamp ....................................... pg. 16
Other Parts
u Battery Pack Mount ............................ pg. 8
i Viewfinder .......................................... pg. 14
o Grip Strap........................................... pg. 14
p •Camera sensor
Be careful not to cover this area; a sensor
necessary for shooting is built-in here.
•Remote Sensor ................................. pg. 47
Q Video Light ......................................... pg. 21
W Stereo Microphone
For use when recording.
E Eyepiece............................................. pg. 63
R Speaker .............................................. pg. 40
T LCD Monitor ...................................... pg. 19
Y Shoulder Strap Eyelets ......................... pg. 15
U Clock Battery Slot ............................... pg. 10
I Tripod Mounting Socket ...................... pg. 15