EXTERNAL DEVICES
ENGLISH
43
For SIRIUS Radio
Activate your subscription after connection:
~ Turn on the power.
on the monitor panel:
Ÿ Select “SAT” for the source.
on the monitor panel:
• ☞ also page 11
The SIRIUS Satellite radio starts updating all
the SIRIUS channels. (☞ “GCI update” column
below.)
• Once completed, SIRIUS Satellite radio tunes
in to the preset channel, CH184.
! Check your SIRIUS ID. (☞ page 61)
⁄ Contact SIRIUS on the internet at
<http://activate.siriusradio.com/>
to activate your subscription, or you
can call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
“Subscription Updated Press Any Key to Continue”
appears on the monitor once subscription has been
completed.
For XM Radio
Activate your subscription after connection:
•
Only Channel 0, 1, and 247 are available before activation.
~ Turn on the power.
on the monitor panel:
Ÿ Select “SAT” for the source.
on the monitor panel:
• ☞ also page 11
The XMDirect
TM
Universal Tuner Box starts
updating all the XM channels. “Channel 1”
is tuned in automatically. (☞ “GCI update”
column below.)
! Check your XM Satellite radio
ID labelled on the casing of the
XMDirectTM Universal Tuner Box, or
tune in to “Channel 0.”
(☞ page 44)
⁄
Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
• JVC SIRIUS Satellite radio interface, KS-SRA100, for listening to SIRIUS Satellite radio.
• JVC Smart Digital Adapter, XMDJVC100, for listening to XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS : “Channel is Updating XX% completed” appears.
For XM : “UPDATING” appears.
• Updating takes a few minutes to complete.
• Do not press any buttons or perform any operations until updating is completed.
EN_KW-AVX810[J]f.indb 43EN_KW-AVX810[J]f.indb 43 08.1.25 7:50:41 PM08.1.25 7:50:41 PM
