EN41
PLAYBACK
Advanced Features For Video
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
IN UTS/AV P
COPY
STEREO
–
SOUND
1
SP
OFF
OFF
–
–
–
–
–
NRETUR
O.O
Using Menus For Detailed Adjustment
The following procedure applies to all except
Synchro
Comp (
੬
pg. 69, 70).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select “
1
RETURN” and
press it twice to close the Menu Screen.
NOTES:
●
It is also possible to change the ON SCREEN settings by
pressing DISPLAY on the remote control (provided).
●
“REC MODE” can be set when the Power Switch is set to
“ ” or “ ” (
੬
pg. 15, 29).
●
When “S/AV INPUT” is set to “ON”, camcorder
playback cannot be viewed on the AV output.
Display
Power Switch
MENU Wheel
੬ pg. 42.
੬ pg. 42.
੬ pg. 70.
Allows you to set the video recording mode (SP or LP) depending on your preference
(
੬ pg. 15).
It is recommended you use “REC MODE” in the “
VIDEO” Menu when using this
camcorder as a recorder during dubbing (੬ pg. 58, 59).
ON: Enables dubbing of images recorded on a tape to a memory card (
੬ pg. 60).
OFF: Enables snapshots to be taken during video playback.
ON: Enables audio/video signal input from the AV and S-VIDEO connectors (੬ pg. 58).
OFF: Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO
connectors (੬ pg. 54, 58).
Makes a beep or melody sound/activates the shutter sound effect.
Turns on/off the tally lamp.
Starts automatic demonstration.
Turns on/off the Microphone Level Indicator.
Makes color bars appear/disappear.
Makes the camcorder’s indications appear/disappear from the connected TV screen.
Makes the date/time appear/disappear on the camcorder.
Makes the time code appear/disappear on the camcorder.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
BEEP*
TALLY*
DEMO MODE*
MIC IND.*
COLOR BAR*
ON SCREEN*
DATE/TIME*
TIME CODE*
Menu Screen
Lock Button
Recording Start/Stop Button
VIDEO
DISPLAY
SYSTEM
* Each setting is linked with “ DISPLAY” or “ SYSTEM”, which appears when the Power Switch is set to “ ”
(੬ pg. 30, 31). The parameters are the same as in the description on pg. 30, 31.
