21
ENGLISH
Activating the level meter
You can show the level meters on the display
while playing any source.
This unit is equipped with three level meter
patterns.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press EQ (equalizer)
twice
.
The last selected level meter
appears on the display.
2
Select the level meter pattern you
want.
As you turn the control
dial, the level meters
change as follows:
Sound
modes
The list below shows the preset value settings for each sound mode.
Preset values
Low Mid High
C.Freq. Q (Width) Level C.Freq. Q (Width) Level C.Freq. Level
Flat 50 Hz Q1 00 700 Hz Q1 00 8 kHz 00
Hard Rock 80 Hz Q2 +03 700 Hz Q1 00 8 kHz +02
R & B 80 Hz Q3 +03 2 kHz Q2 +01 12 kHz +03
Pop 120 Hz Q1 +02 2 kHz Q2 +01 12 kHz +02
Jazz 80 Hz Q1 +03 1 kHz Q1 +01 8 kHz +03
Dance Music
50 Hz Q2 +04 700 Hz Q1 –02 8 kHz +01
Country 50 Hz Q4 +02 700 Hz Q1 00 12 kHz +02
Reggae 80 Hz Q1 +03 2 kHz Q2 +02 12 kHz +02
Classic 120 Hz Q1 +03 1 kHz Q1 00 8 kHz +02
User 1 50 Hz Q1 00 700 Hz Q1 00 8 kHz 00
User 2 50 Hz Q1 00 700 Hz Q1 00 8 kHz 00
User 3 50 Hz Q1 00 700 Hz Q1 00 8 kHz 00
E
EQ
Level 1
Off
Level 2
Level 3
Level Meter 1:
The audio level meter fluctuates vertically.
Level Meter 2:
The speaker on the display vibrates as input
audio level changes.
Level Meter 3:
The left and right audio level meters appear.
• If the small animation display is selected, only
one audio level meter can be shown.
EN18-21LH1000[J]f.pm5 02.2.15, 1:38 PM21
