18 EN
RECORDING
Basic Features (cont.)
5
S
PAUSE
RETAKE (
2
/
3
) Button
Display
5 Sec. Rec mode indicator
5 SEC. REC Button
5Sec. Rec (5-Sec. Recording):
To record a scene for 5 seconds, providing quick
scene transitions like those seen in TV programs.
1)Make sure the recording mode is set to “SP”.
2)During Record–Standby, press 5SEC. REC.
“ 5S” appears and 5Sec. Rec is reserved.
3)Press the Recording Start/Stop Button. Recording
starts, and after 5-second recording is finished, the
camcorder reenters the Record–Standby mode
automatically.
4)To cancel the 5Sec. Rec. function, press 5SEC.
REC again so that “ 5S” disappears.
●
Fade/Wipe (
੬
pg. 19) cannot be activated by
pressing 5SEC. REC.
Quick Review:
To check the end of the last
recording.
1)Make sure the camcorder is in the Record–Standby
mode.
2)Press
2
and release quickly.
Tape is rewound for approx. 2 seconds and
played back automatically, then pauses in
Record–Standby mode for the next shot.
●
Distortion may occur at the start of playback. This
is normal.
Retake:
To re-record certain segments.
1)Make sure the camcorder is in the Record–Standby
mode.
2)Press and hold either RETAKE to reach the start
point for new recording. Pressing
3
forwards the
tape and pressing
2
reverses it.
3)Press the Recording Start/Stop Button to start
recording.
●
Noise bars appear and pictures may become
monochrome or darken during Retake. This is
normal.
Quick Review (
2
) Button
