19
ENGLISH
Insert a microSD card
Preparation:
Set the power/mode switch to OFF
.
1 Open the microSD card cover.
2 Firmly insert the card with its clipped
edge fi rst.
Bottom of the Camera
3 Close the microSD card cover.
8 To remove a microSD card
Push the microSD card once.
After the card comes out a little, pull it out.
NOTES
•
Insert and remove the microSD card only
while the power is turned off. Otherwise,
data on the card may be corrupted.
•
Do not touch the terminal on the reverse
side of the label.
Change the recording medium
The camera is programmed to record on the
built-in hard disk when it is shipped from the
factory. You can change the recording medium
to microSD card.
Set [REC MEDIA FOR VIDEO] and
[REC MEDIA FOR IMAGE] to [SD].
(੬ p. 67, 68)
NOTE
Video picture quality will automatically be set
to [SP].
Format a microSD card when using it
for the fi rst time
This will also ensure stable speeds and
operation when accessing the microSD card.
Select [EXECUTE] in [FORMAT SD
CARD] to format the card. (੬ p. 71)
