![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/99/999a4880-1b5d-56b4-c52f-104ca10f17b2/999a4880-1b5d-56b4-c52f-104ca10f17b2-bg4.png)
4 EN
MAJOR FEATURES
Integrated Auto Light
(
੬ pg. 23)
Programme AE with Special
Effects (
੬ pg. 25)
Ⅲ Electronic Fog Filter
Ⅲ ND Effect
Ⅲ Sepia
Ⅲ Twilight
Ⅲ Sports
Ⅲ Nega/Posi
Ⅲ 1/2000 sec. High Speed Shutter
Super VHS-ET (੬ pg. 11)
Digital Still Camera Built-in
(PC communication capable)
(
੬ pg. 16 – 18, 40 – 47)
Picture Stabiliser (੬ pg. 21)
Digital Hyper Zoom
(
੬ pg. 21)
Zoom in
Zoom out
TBC (Time Base Corrector)
(
੬ pg. 36)
NOTES about Automatic Demonstration
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
Ⅲ
Available when the System Select Switch is set to “VIDEO” and the Power Switch is set to “AUTO” or
“PRO.”.
Ⅲ
Operating the Power Zoom Lever during the demonstration stops the demonstration temporarily. If the
Power Zoom Lever is not moved for more than 1 minute after that, the demonstration will resume.
Ⅲ
“DEMO MODE” remains “ON” even if the camcorder power is
turned off.
Ⅲ
To cancel Automatic Demonstration, set the Power Switch to
“PRO.” and press MENU while the demo is in progress. This takes
you directly to the demo mode’s Setting Menu (so you will not have
to go through the main Menu Screen.) Rotate the Select Wheel to
select “OFF” and press it.
NOTE:
When a tape whose Erase Protection tab is in the position that allows
recording is loaded in the camcorder, demonstration is not available.
Setting Menu