34 EN
Connection To A Windows
®
PC
Image data stored in the camcorder’s built-in memory can
be transferred to a Windows
®
PC and saved using the
provided image transfer software, Picture Navigator. The
image data transferred to a Windows
®
PC can also be
further processed using Mr. Photo Gold, and the still image
processed on the PC can be inserted onto a tape
(੬ pg. 53).
To assure safety, make sure all units are turned off before
making any connection.
1
Connect the camcorder’s DIGITAL connector to the
provided COM Port (RS-232C) on a Windows
®
PC,
using the provided PC connection cable.
2
Set the Power Switch to “ ”. The VIDEO Lamp
comes on. If the DSC Lamp is not lit, press REFRESH
for approx. 1 second to select “DSC”. A still image
stored in memory appears.
•When transferring still images to a computer, be
sure that a still image is displayed on the screen.
3
Launch the provided software on your Windows
®
PC.
Transfer the still images stored in the camcorder’s
memory to the Windows
®
PC. Refer to the software’s
instruction manual on the provided CD-ROM for
details.
•During transfer of the still image, the camcorder’s
screen becomes blue and “ ” is
displayed. After transferring is finished, the screen
displays the same still image as in step 2.
4
Close the software, then switch off the camcorder.
NOTES:
●
Before transferring still images from your personal
computer to the camcorder’s built-in memory, perform
the camcorder’s Picture Mode Setting (
੬
pg. 16). The
still images will be transferred from the personal
computer in the selected Picture Mode.
●
When transferring still images from your personal
computer to the camcorder, make sure the number of
images to be transferred is smaller than the camcorder’s
remaining number of shots available.
●
Use the AC Adapter as the power supply instead of the
battery pack.
●
The still images stored in the camcorder’s memory are
not automatically removed after being transferred to the
PC. If you wish to remove those still images from the
camcorder’s memory, delete them (
੬
pg. 33).
●
Windows
®
are trademarks of Microsoft Corporation,
registered in the U.S.A. and other countries.
For Windows
®
:
To COM Port
(RS-232C)
Makes the DSC lamp come on.
PC connection
cable
To DIGITAL
connector
D.S.C. PLAYBACK
(cont.)
Open the cover.
