EN21
FINE 12
30 29 1
0
NOTES:
●
The remaining number of shots varies according to the
selected Picture Mode. In the “STANDARD” mode,
twice as many still images can be shot as in the “FINE”
mode.
●
Some sample images have been stored in the built-in
memory at the factory.
If you wish to delete them, first remove the “Protect”
function (
੬
pg. 55), then perform the “Delete” function
(
੬
pg. 56).
●
When the Power Switch is set to “AUTO”, it is not
possible to select the Snapshot mode. You can use the
Snapshot mode you selected in the “PRO.” mode.
●
If a Snapshot is taken while the camcorder is in the
WIDE mode (
੬
pg. 35), the Snapshot image is recorded
without the black bars at the top and bottom of the
screen.
Pictrue mode
display
Remaining number
of shots
(Blinking)
FULL*
(Snapshot mode with
no frame)
M. DRIVE ߛ
(Motor Drive mode)
PIN-UP*
(Pin-Up mode)
MULTI-4 **
(Multi-Analyzer 4)
MULTI-9**
(Multi-Analyzer 9)
* There is a momentary camera shutter-type blackout
together with the image.
** Continuous camera shutter-type blackout takes place 4
or 9 times with the image, like serial photography, then
the 4 or 9 still images you took are displayed.
ߛ Stores 4 still images continuously for approx. 2 seconds.
During still image storage, “MD” blinks and the 4 still
images are displayed in the order that you took them.
There is no sound effect of a shutter closing.
CONTINUED ON NEXT PAGE
