![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/6/66/66649711-1f93-45f1-b809-80d7bb80a4a0/66649711-1f93-45f1-b809-80d7bb80a4a0-bg23.png)
EN 35
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
ADVANCED FEATURES
੬ pg. 40, “Self-Timer”
[OFF]: Disables 5-second recording.
5S: Enables 5-second recording. (੬ pg. 40)
Anim.: Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
[OFF]: Disables the function.
ON: When the distance to the subject is less
than 1 m, set “TELE MACRO” to “ON”. You can
shoot a subject as large as possible at a
distance of approx. 70 cm.
NOTE:
Depending on the zoom position, the lens may go out
of focus.
[OFF]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
CINEMA* : Inserts black bands at the top and
bottom of the screen. The indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV’s
instruction manual.
16:9 WIDE* : For playback on TVs with an
aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The
indicator appears. When using this mode,
refer to your wide-screen TV’s instruction
manual.
* Available only when the VIDEO/MEMORY switch
is set to “VIDEO”.
NOTE:
During playback/recording on 4:3 TVs/LCD monitor,
black bands are inserted at the top and bottom of
the screen and the image appears like a letter
boxed 16:9 movie. (CINEMA and 16:9 WIDE mode)
[OFF]: Disengages the function.
ON : Helps cut down on noise created by
wind. The “ ” indicator appears. The quality of
the sound will change. This is normal.
੬ pg. 39, “Flash Brightness Adjustment”
SYSTEM
The “s SYSTEM” functions which are set when
the power switch is set to “M” are also applied
when the power switch is set to “PLAY”.
[ ] = Factory-preset
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (੬ pg. 25, 39)
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect.
(੬ pg. 25, 39)
OFF: The tally lamp remains off at all times.
[ON]: The tally lamp comes on to signal the start
of recording.
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
SELF-TIMER [OFF] / ON
5S
TELE MACRO
WIDE MODE
WIND CUT
FLASH ADJ.
BEEP
TALLY
REMOTE
GR-XASIA.book Page 35 Tuesday, April 12, 2005 8:52 PM