7
INSTALLATION REQUIREMENTS
Tools and Parts
IMPORTANT:
■ Installer: Leave Installation Instructions with the homeowner.
■ Homeowner: Keep Installation Instructions for future
reference. Save these Installation Instructions for the local
electrical inspector’s use.
Tools Needed:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Parts Needed:
■ #8 x 3" (7.6 cm) wood screws (longer screws may be needed) (6)
■ 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood boards (2)
■ Custom wood overlay panels—consult a qualified
cabinetmaker or carpenter to make the custom wood panels.
See “Custom Wood Overlay Panels” for more information.
OR
Panel kit—See “36" Models or 42" French Door Models” for
panel kit information.
■ Flexible, codes-approved water supply tubing, a ferrule, a
union and a ¹⁄₄" (6.35 mm) compression fitting.
Parts Provided:
■ Cordless drill
■ Drill bits
■ Adjustable wrenches (2)
■ Phillips screwdriver
■ Small level
■ ³⁄₃₂" hex key
(panel kits only)
■ ¹¹⁄₃₂" nut driver
■ ³⁄₈" and ¹⁄₂" open-end wrenches
■ ⁵⁄₃₂" and ³⁄₁₆" hex key
■ ¹⁄₄" and ⁵⁄₁₆" socket drivers
■ Tape measure
■ Utility knife
■ Tape (painters)
■ Appliance dolly
Slotted Hex-head Screw
W10141645 (21)
Hex-head Pointed Screw
W10141189 (8)
Hex-head Blunt Screw
W10142233 (4)
Shoulder Washer (use with hex-head
pointed screw)
W10471946 (4)
Phillips-head Flat Screw
8281252 (28)
Round-head Screw
1163283 (24)
Door Adjustment Pin
(preinstalled)
W10234194 (2)
Door Stop Pin
W10234202 (2)
Drawer Panel Bracket
W10606815 (2)
Standard Integrated Grille Bracket
W10182743—Left (1)
W10182741—Right (1)
Fully Integrated Grille
Bracket
W10260890—Left (1)
W10260891—Right (1)
Filler Board “L” Bracket
W10234199 (2)
Panel Top Bracket
W10667450 (2)
Top Grille Lower Trim
W10634858—36" BM (1)
W10606812—42" BM, SxS (1)
