75
Listening to the Radio—Continued
Setting the Satellite Radio Mode
Before you can listen to XM Satellite Radio, you must
set the Satellite Radio mode to XM.
Selecting XM Satellite Radio
1
Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ] but-
tons to select “7. Hardware
Setup”, and then press [Enter].
The “Hardware Setup” menu appears.
3
Use the Up and Down [ ]/[ ] but-
tons to select “3. Tuner”, and
then press [Enter].
The “Tuner” screen appears.
Input Selector
Macro
123
VCRDVD
CDR/MD
CD
Zone
2
Remote Mode
Dimmer
Tape/AMP
Sleep
Receiver
TV
Dock
Cable
VOL
CH
Disc
Album
+
-
Enter
T
o
p
M
e
n
u
M
e
n
u
Display Muting
E
x
i
t
G
u
i
d
e
Prev
CH
R
e
t
u
r
n
S
e
t
u
p
Playlist
RandomRec
SAT
Zone
3
Receiver
Setup
Enter
Receiver
S
e
t
u
p
Enter
Enter
7. Hardware Setup
1. Remote Control
2. Zone2/Zone3
3. Tuner
4. Analog Multich
5. HDMI
6. Network
MOVE ENTER RETURN
ENTER
RETURN
EXIT
SETUP
Enter
Enter
7–3. Tuner
Satellite Radio None
VALUE RETURN
RETURN
EXIT
SETUP
4
Use the Left and Right [ ]/[ ]
buttons to select “XM”.
If there are 2 items on the Tuner
screen, use Up and Down [ ]/[ ]
buttons to select “Satellite
Radio”.
Pressing the Left and Right [ ]/[ ]
buttons cycles through the following
options: None
→ XM → SIRIUS →
XM/SIRIUS
None: Select if you’re not using
satellite radio.
XM: Select to use XM Satellite
Radio.
SIRIUS: Select to use SIRIUS Satel-
lite Radio.
XM/SIRIUS:Select to use XM Satel-
lite Radio and SIRIUS Sat-
ellite Radio.
5
When you’ve finished, press the
[Setup] button.
Setup closes.
AV controller
On the AV controller, press the
[Tuner] Input Selector button
repeatedly to select XM.
Remote
controller
On the remote controller, press
the [Receiver] Remote Mode but-
ton, and then press the [Tuner]
Input Selector button repeatedly
to select XM.
If “CHECK XM TUNER” appears on
the display, make sure the XM Mini-
Tuner is connected properly.
Enter
S
e
t
u
p
Tuner
Tuning
Receiver
Tuner
