Chapter 3 - FTP Commands List of Commands
FTP Adapter Reference Guide
14
Firewall Connection Method URL (-FW or -FIREWALL)
If required for connection, use the Firewall Connection Method URL (-FW or -
FIREWALL) command to specify the URL for the proxy server (firewall). One of the
following connection methods must be specified:
♦ OPEN
♦ SITE
♦ TRANSPARENT
♦ USER
♦ USERFW
♦ USERFWPASS
♦ USERLOGON or USER
♦ USERLOGONFW or USERFW
-FIREWALL FTP://[fw_user[:fw_pass]@][fw_host[:fw_port]]/method
Option Description
fw_user
Specify the user name to connect to the proxy server. Unless you
are also specifying a password, this parameter must be followed by
@ if you specify fw_host.
:fw_pass Specify the password that authenticates the user name. This
parameter must be followed by @ if you are also specifying
fw_host.
fw_host
The name (or address) of the proxy server to which to connect.
:fw_port The name (or number) of the port to use for connection.
/method
Required value. The method dictates how the firewall connection is
established based on a combination of the connection information
provided using
–FIREWALL (for proxy server URL) and –URL (for
FTP URL). Select one of the following Methods, which specifies the
corresponding Connection Information.
Method Connection Information
OPEN
OPEN ftp_host, USER ftp_user, PASS
ftp_pass
