A SERVICE OF

logo

Setting the ISA Connector Type: Switch 9 (ED) specifies the type of system connector used
with the adapter: the double connector (16-bit ISA connector) or the single connector (8-bit ISA
connector).
Figure 2-3. ISA Connector Type Switch
Switch 9 (ED) Edge-Connector
On Adapter is in a
double-connector slot
Off Adapter is in a
single-connector slot
Setting the Base I/O Address: Switches 5 through 8 (C1, C2, C4, and C8) select the base I/O
address.
If you install more than one IBM ARTIC adapter in ISA slots, set each adapter to a unique base I/O
address to prevent resource conflicts.
Note: Adapters installed in PCI slots are configured automatically and do not affect the settings for
adapters installed in ISA slots.
2-6 IBM ARTIC186 8-Port Adapter GTO