Hunter Fan Type 3 Models Manual

next previous

45007-01•11/02/07•HunterFanCompany

Problem: Nothing happens; fan does not move.

1. Turn power on, replace fuse, or reset breaker.

2.Loosencanopy,checkallconnectionsaccordingtothewiringthe

fan section.

3. Check the plug connection in the switch housing.

4. Push motor reversing switch ﬁrmly left or right to ensure that the

switch is engaged.

5. Pull the pull chain to ensure it is on.

6.Removetheshippingbumpers.

Problem: Noisy operation.

1. Tighten the blade bracket screws until snug.

2.Checktoseeifthebladeiscracked.Ifso,replacealltheblades.

Problem: Excessive wobbling.

1. If your fan wobbles when operating, use the enclosed balancing kit

and instructions to balance the fan.

2.Tightenallbladeironscrews.

3. Turn power oﬀ, support fan very carefully, and check that the

hanger ball is properly seated.

If you need parts or service assistance, please call

888-830-1326orvisitusatourWebsiteat

http://www.hunterfan.com.

HunterFanCompany

2500FriscoAvenue

Memphis, Tennessee 38114

11 • Troubleshooting