A SERVICE OF

logo

42680-01 • 02/18/10 • Hunter Fan Company
Note: Glass shade style and number of lights may vary.
7-6. To install each shade, rst loosen the three thumbscrews.
7-7. Raise the shade to the light xture. Tighten the thumbscrews
securely.
7-8. Install B10 candelabra-based light bulbs (40 Watt maximum each).
Steps 7-7 – 7-8
umbscrews
Shade
Bulb
7 • Completing Your Installation With a Multi Staked Light Fixture (Continued)
13
Note:is product may not be compatible
with certain remote/wall controls or
compact fluorescent bulbs.
Note: In compliance with U.S. Federal energy regulations, this ceiling fan contains a wattage saver that restricts
the light kit to a maximum of 190 Watts. Exceeding that limit or the specications on the light sockets
may result in re hazard or improper operation. If lights do not appear to be operating properly, see the
troubleshooting section