12
42674-01 • 12/17/08 • Hunter Fan Company
Installing the Glass Bowl
7-8. First install the included CFL bulbs.
7-9. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may nd the plastic
breakaway connector on the end of the extra chain.)
7-10. read the fan pull chain through the hole in the metal disk. en,
thread the fan pull chain through the hole in the center of the
glass bowl.
7-11. read the light pull chain through the hole in the center of the
glass bowl.
7-12. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-13. read the fan pull chain
and light pull chain through
the appropriate holes.
7-14. read the light pull chain
through the nial and screw
the nial onto the threaded
rod end until tight.
For Light
Bulbs
(60 Watt
Maximum)
Metal Rod
Metal Disk
Pull Chain
Glass Bowl
Cover Plate
Finial
Breakaway
Connector
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
