12
42669-01 • 09/10/09 • Hunter Fan Company
Installing the Glass Bowl
7-8. Install included 14w CFL bulbs.
7-9. read the light and fan pull chains through the hole in the center
of the glass bowl. en, thread the light pull chain through the
hole in the center of the cover plate.
7-10. read the fan pull chain through the grommet hole in the side of
the cover plate.
7-11. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-12. read the light pull chain through the nial and screw the nial
onto the threaded rod end until tight.
7-13. Attach the extra pull chains (included) to the light and fan pull
chains using the plastic
breakaway connector. (You
may nd the
plastic breakaway connector
on the
end of the extra chain.)
for Light Bulbs
(14 Watt
Maximum)
Metal Rod
Metal Disk
Pull Chain
Glass Bowl
Cover Plate
Finial
Breakaway
Connector
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
