12
42666-01 • 10/29/08 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-3. First install included 14W CFL bulbs into the sockets.
7-4. If the fandangle is attached to the extra pull chain, remove it now.
7-5. Attach the extra pull chain (included) to the fan pull chain using
the plastic breakaway connector. (You may nd the plastic
breakaway connector on the end of the extra chain.)
7-6. read the fan pull chain through the hole in the metal disc. en,
thread the fan pull chain through the hole in the center of the glass
bowl.
7-7. read the light pull chain through the hole in the center of the
glass bowl. en, read the light
pull chain through the hole in the
center of the cover plate.
7-8. read the fan pull chain through
the grommet hole in the side of
the cover plate.
7-9. Place the cover plate up against
the glass bowl. Align the holes in
the cover plate and glass bowl.
7-10. read the light pull chain
through the nial and screw the
nial onto the threaded rod end
until tight.
7-11. Reattach the fandangle to the
extra pull chain.
Breakaway
Connector
For Light Bulbs
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
