12
42651-01 • 09/25/08 • Hunter Fan Company
Installing the Glass Bowl
7-7. First install B10 candelabra bulbs (60
Watt Maximum) into the sockets.
7-8. Attach the extra pull chains (included)
to the fan pull chain and light pull chain using
the plastic breakaway connector. (You may
nd the plastic breakaway connector on the
end of the extra chain.)
7-9. read the pull chains through the holes
in the metal disc. en, thread the pull chains
through the hole in the center of the glass
bowl.
7-10. read the pull chains through the
grommet holes on the sides of the cover plate.
7-11. Place the cover plate up against the glass
bowl. Align the holes in the cover plate and
glass bowl.
7-12. Screw the nial onto the threaded rod
end until tight.
7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Grommet Hole
readed
Rod
Metal Disc
Glass Bowl
Cover Plate
Finial
