A SERVICE OF

logo

9
42404-01 • 01/04/10 • Hunter Fan Company
6 • Installing the Canopy
6-1. Rotate the hanger ball so the tab in the canopy is secure in the
groove in the hanger ball.
WARNING: Failure to complete this step could cause fan to fall.
6-2. Lift the fan and align the canopy screw holes with the mounting
holes on the ceiling plate.
6-3. Partially install a canopy screw into the side opposite the ceiling
plate tabs.
6-4. Partially install another canopy screw into the hole between the
two ceiling plate tabs. Securely tighten both screws.
Step 6-1
Step 6-2
Groove
Tab
Step 6-3
Step 6-4