14
41225-01 • 12/04/09 • Hunter Fan Company
3 • Assembling tbe Blades
8 • Aligning the Fixture Fitter (Continued)
8-6. Plug the upper and lower plug connectors together. e connectors
are keyed and will only go together one way. Before assembling
the light xture to the xture tter locate the arrow shaped hole
positioned directly behind one of the (3) screw clearance holes on
the outside ange of the light xture.
8-7. Align the arrow in the light xture with the arrows previously used to
align the fan trim and xture tter.
8-8. Attach the light xture to the xture tter using (3) 3/8” long
Phillipsa round head screws with lock washers. Tighten the screws
securely.
8-9. Install (2) candelabra base bulbs. Refer to
maximum wattage label on light xture for
maximum lamp wattage.
Fixture
Trim
Light
Fixture
Fixture
Fitter
Note: In compliance with U.S. Federal energy regulations, this ceiling fan contains a wattage saver that restricts
the light kit to a maximum of 190 Watts. Exceeding that limit or the specications on the light sockets
may result in re hazard or improper operation. If lights do not appear to be operating properly, see the
troubleshooting section
Step 8-6-8-8
Step 8-9
