A SERVICE OF

logo

Open as PDF
next previous
4 Switch Interface Administration Changing Switch System Parameters
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 193
3 Press F3 (Save).
The system displays the message that the switch system parameters
have been changed.
4 Press F1 to acknowledge the message.
5 Press F6 (Cancel) to return to the Switch Interfaces menu.
6 Starting the Voice System on page 93 as described in Chapter 3, Voice
System Administration .
Table 16. Switch System Parameters
Field Name Description Valid Values
Background
Output Volume:
This parameter specifies
the adjustment to the
output volume level in
percent for the speech
being played in the
background.
A numeric entry for the
percentage
Hunt Group
Method:
This parameter specifies
the order of hunting for
idle channels.
Ascending (default),
descending, or random
Press
F2 (Choices) to
select from a menu.