NOTE: No setup is necessary, but HP Direct Print must be enabled. Your mobile device must have an
HP print application installed.
The HP LaserJet Professional P1102w model does not support HP Direct Print.
1. To enable HP Direct Print, follow these steps:
a. After the product is connected to the network, print a configuration page and identify the
product IP address.
b. At your computer, open a Web browser and enter the product IP address into the address
line. The HP EWS screen appears.
c. Click the Networking tab.
d. On the Networking page, click Wireless Direct Setup. Select the check box, enter the
network name (SSID) in the Wireless Direct Printing Name (SSID) field, and then click
the Apply button. The IP address of the mobile device appears in the Networking page.
NOTE: To find the network name (SSID), click the Wireless Configuration menu in the
Networking page.
2. To print a document from an application, select File, and then select Print.
NOTE: If only one product that supports HP Direct Print is connected to the wireless network, the
document prints. If more than one product that supports HP Direct Print is connected, a list of
products appears; you must select your product before proceeding to the next step. If no product is
discovered, follow the instructions in step 1 to connect the product.
Use AirPrint
Direct printing using Apple’s AirPrint is supported for iOS 4.2 or later. Use AirPrint to print directly to
the product from an iPad (iOS 4.2), iPhone (3GS or later), or iPod touch (third generation or later) in
the following applications:
●
Mail
●
Photos
●
Safari
●
Select third-party applications
NOTE: The product must be connected to a wired or wireless network.
52 Chapter 6 Print tasks ENWW
