Solid-state drive (SSD)
Description Spare part number
256-GB, Self-encrypting drive (SED), SSD 731194-001
240-GB, SSD 732680-001
180-GB, SSD 732678-001
128-GB, SSD (for use only in HP EliteBook 15 models) 744483-001
120-GB, SSD 732681-001
32-GB, SSD 743008-001
Before removing the solid-state drive module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
Service cover on page 48).
5. Disconnect the battery.
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the computer.
Component replacement procedures
53
