EN
Preventative Maintenance
4-5
Preventative Maintenance
The preventative maintenance cycle for this printer, conducted by
service personnel, is every 150,000 pages. To order the maintenance
kit see page 8-4. The kit contains one Fuser, one Transfer Roller, one
Tray 1 Pickup Roller, one Tray 1 Separation Pad, two 250-sheet Tray
Pick Rollers, two 250-sheet Tray Separation Pads and Springs, four
500-sheet Tray Pick D-Rollers, and two 500-sheet Tray Feed/
Separation Rollers. Refer to the instructions included in the kit for
detailed replacement procedures.
Reset Maintenance Count
After the PM kit has been installed, reset the maintenance count.
1
Turn the printer off.
2
While pressing [Item-] and [Value-] turn the printer on.
Reset Maintenance Count appears, followed by INITIALIZING. After
a few seconds READY appears.
Expected Life of Components
The following table shows the expected life of certain components in
the printer. To order parts, see Chapter 8.
Table 4-2. Life of Components
Part name Part No. Quantity Expected Life
1 Pickup Roller RB2-1821-000CN 1 150,000 pages
2 Separation Pad RF5-2435-000CN 1 150,000 pages
3 Tray 1 Pickup Roller RB2-1795-000CN 1 150,000 pages
4 Tray 1 Separation pad RF5-2400-000CN 1 150,000 pages
5 Fuser
110-127V
220-240V
RG5-3528-000CN
RG5-3529-000CN
1
1
150,000 pages
150,000 pages
