TM 11-6625-1614-15
Section II
Paragraph 2-14 to 2-15
DO NOT CHANGE THE SETTING OF THE
LINE VOLTAGE SWITCH WHEN THE VOLT-
METER IS OPERATING.
2-14. REPACKAGING FOR SHIPMENT.
2-15. The following paragraphs contain a general
guide for repackaging of the instrument for shipment.
Refer to Paragraph 2-16 if the original container is
to be used: 2-17 if it is not.
2-16. If the original container is to be used, proceed as
follows:
a. Place instrument in original container if avai-
Model 410C
lable.
Figure 2-4. Two Half Modules in Rack Adapter
b. Ensure that container is well sealed with strong
tape or metal bands.
2-17. If original container is not to be used, proceed
c. Place instrument and inner container in a heavy
as follows:
carton or wooden box and seal with strong tape or
a. Wrap instrument in heavy paper or
metal bands.
plastic
before placing in an inner container.
b. Place packing material around all sides of
instrument and protect panel face with cardboard d. Mark shipping container with "DELICATE
strips. INSTRUMENT”, “FRAGILE”, etc.
2-2
01556-1
