A SERVICE OF

logo

Troubleshooting
Solving Media-Handling Problems
11-30
The Cutter is Jammed
Switch the printer off.
Open the window.
With you finger and thumb carefully pinch together the cutter assembly plates
(1) and move it to the left (2).
If the paper needs to be removed from the printer because it is damaged, perform
part of the procedure described on page 3-31, Removing a Roll from the Printer.
A Sheet is Ejected when You Switch On the Printer
The printer is doing an automatic calibration check. Wait for the STATUS /
Ready message and then reload the sheet.
1
2
C472378