
6 - 10 Rev A
5/15/07
Dolphin® 9500 Series User’s Guide
Memory
There are two kinds of memory:
Main Board/IPSM 64MB RAM x 64MB non-volatile Flash
Secure Digital (SD) Card Each terminal has an SD memory interface for additional application and data storage. You can order
memory cards to increase memory. Each terminal contains an access door on the side panel that
makes the SD memory interface user-accessible; see Access Door to SD Memory on page 3-10.
The Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/Storage Card (non-volatile)
memory. Access this setting whenever you receive system messages about memory.
There are three tabs: Main, Storage Card, and Running Programs.
Main Tab This tab displays the usage statistics of the 64MB of on-board, volatile RAM memory.
Storage Card Tab This tab displays the current capacity and usage statistics of the selected memory type; IPSM or
Storage Card. Select the memory type from the drop-down list. IPSM is selected by default.
Field Description
Columns
Storage: The part of RAM memory used for storing programs and program data.
Program: The part of RAM memory used to run programs.
Total
Displays the current MB of memory allocated for Storage and Program use.
In use
Displays the total MB of that allocated memory being used in Storage and Program mem-
ory functions.
Free
Displays the total MB of memory available for Storage and Programs use.
Total storage card
memory
The total MB of memory capacity of the selected memory.