Grizzly G0443 Manual

A SERVICE OF

next previous







DISCONNECTING POWER SUPPLY.Alwaysdis-

connect machine from power supply before ser-

vicing, adjusting, or changing cutting tools (bits,

blades,cutters,etc.).MakesureswitchisinOFF

positionbeforereconnectingtoavoidanunexpect-

edorunintentionalstart.

APPROVED OPERATION. Untrained operators

can be seriously hurt by machinery. Only allow

trained or properly supervised people to use

machine.Whenmachine isnotbeing used,dis-

connect power, remove switch keys, or lock-out

machinetopreventunauthorizeduse—especially

aroundchildren.Makeworkshopkidproof!

DANGEROUS ENVIRONMENTS. Do not use

machinery in wet or rainy locations, cluttered

areas,aroundflammables,orindarkareas.Keep

workareaclean,dry,andwell-lighted.

ONLY USE AS INTENDED. Only use machine

foritsintended purpose.Nevermodify machine

forapurposenotintendedbythemanufacturer!

USE RECOMMENDED ACCESSORIES.Consult

thisowner’smanualorthemanufacturerforrec-

ommended accessories. Using improper acces-

sorieswillincreasetheriskofseriousinjury.

CHILDREN & BYSTANDERS. Keep children

andbystandersasafedistanceawayfromwork

area.Stopusingmachineifchildrenorbystand-

ersbecomeadistraction.

REMOVE ADJUSTING TOOLS. Never leave

adjustmenttools,chuckkeys,wrenches,etc.inor

onmachine—especiallynearmovingparts.Verify

removalbeforestarting!

SECURING WORKPIECE. When required, use

clampsorvisestosecureworkpiece.Asecured

workpieceprotectshands

andfreesbothofthem

tooperatethemachine.

FEED DIRECTION.Unlessotherwisenoted,feed

work against the rotation of blades or cutters.

Feedinginthesamedirectionofrotationmaypull

yourhandintothecut.

FORCING MACHINERY.Donotforcemachine.

Itwilldothejobsaferandbetterattheratefor

whichitwasdesigned.

GUARDS & COVERS. Guards and covers can

protect youfrom accidental contact withmoving

parts or flying debris. Make surethey are prop-

erlyinstalled,undamaged,andworkingcorrectly

beforeusingmachine.

NEVER STAND ON MACHINE.Seriousinjuryor

accidentalcontactwithcutting toolmayoccurif

machineistipped.Machinemaybedamaged.

STABLE MACHINE. Unexpectedmovementdur-

ing operationsgreatly increases risk of injury or

loss of control. Before starting, verify machines

arestableandmobilebase(ifused)islocked.

AWKWARD POSITIONS. Keep proper footing

andbalanceatalltimeswhenoperatingmachine.

Donotoverreach!Avoidawkwardhandpositions

that makeworkpiece control difficult orincrease

theriskofaccidentalinjury.

UNATTENDED OPERATION. Never leave

machinerunningwhileunattended.Turnmachine

offandensureallmovingpartscompletelystop

beforewalkingaway.

MAINTAIN WITH CARE.Followallmaintenance

instructions and lubrication schedules to keep

machineingoodworkingcondition.Animproperly

maintainedmachineincreasesriskofinjury.

CHECK DAMAGED PARTS. Regularly inspect

machine for damaged parts, loose bolts, mis-

adjusted or mis-aligned parts, binding, or any

other conditions that may affect safe operation.

Alwaysrepairorreplacedamagedormis-adjust-

edpartsbeforeoperatingmachine.

MAINTAIN POWER CORDS. When disconnect-

ing cord-connected machines from power, grab

andpulltheplug—NOTthecord.Pullingthecord

may damage the wires inside. Do not handle

cord/plugwithwethands.Avoidcorddamageby

keepingitawayfromheatedsurfaces,hightraffic

areas,harshchemicals,andwet/damplocations.

EXPERIENCING DIFFICULTIES. If at any time

you are experiencing difficulties performing the

intended operation, stop using the machine!

Contact our Technical Support Department at

(570)546-9663.