Page 4/16
2 Safety Instructions – PLEASE READ CAREFULLY
• DO NOT use your VERO-1 near water
• DO NOT allow your VERO-1 to get wet
• DO NOT use the VERO-1 near heat sources
• Ensure that cables are NOT positioned in a manner in which they may suffer
abrasion, be walked on or trapped.
• DO NOT remove any screws or open the casing of the product
• ONLY use the supplied power adapter
• DO NOT cover the ventilation slots on the VERO-1 *
• DO NOT place anything in the ventilation slots of the VERO-1
• Fit the mains adaptor to an easily accessible socket, located near the radio
* Your GEO-1 should be positioned to ensure good ventilation so that it will not
overheat. It is recommended to allow a minimum of 5cm free space around it
when choosing its location
2.1 Cleaning
• UNPLUG your VERO-1 before you clean it
• DO NOT use a liquid or aerosol cleaner
• DO NOT use an abrasive cleaning product
• Clean your VERO-1 ONLY using a soft damp (not wet) cloth
2.2 Servicing
• DO NOT attempt to repair any part of your VERO-1
• Contact your dealer if you have any doubt or questions regarding the
installation or operation of your VERO-1
