A SERVICE OF

logo

24
HDMI OVER CAT-5 RECEIVER RS-232 COMMANDS
Switching/Routing Binary Table
ASCII
Command
Input
11A
21B
32A
42B
53A
63B
74A
84B
Boost Settings
DIP switches 4 and 5 on the underside of the unit must be in their default OFF
position for the following commands to work. Use the ASCII commands below to
change the boost modes. For a description of each mode please see page 21.
ASCII Boost Mode
a No Boost (Default)
b Medium Boost
c High Boost
d Very Low Boost