41
Safety Instructions
Operating Instructions Care and Cleaning
Troubleshooting Tips Consumer Support
www.GEAppliances.com
Problem Possible Causes What To Do
Arcing between metal Improper spacing between • See Using the Trivection
™
Oven section.
surfaces in oven while metal surfaces and/or
speedcooking or aluminum foil.
defrosting
Display shows Wiring from house to oven • Contact installer or qualified electrician to check house
“Miswired detected” is incorrect. wiring to oven.
Option not seen on the Option may be listed • Select MORE to see additional items.
display screen on the next screen.
Hot air from oven When using the cooking • This is normal.
features, hot air will exit
the oven through the vent
located above the door.
Food does not bake or Oven controls improperly set. • See the Using traditional bake and roast section.
roast properly in the
Shelf position is incorrect • See the Using traditional bake and roast section.
oven
or the shelf is not level.
Incorrect cookware or • See the Using traditional bake and roast section.
cookware of improper
size being used.
Oven temperature needs • See the Adjust the oven temperature—Do it yourself!
adjustment. section.
Food does not broil Oven controls improperly set. • Make sure you select BROIL.
properly
Improper shelf position • See the Broiling Guide.
being used.
Cookware not suited • Use the broiling pan and grid that came with your oven.
for broiling.
Aluminum foil used on the • See the Using traditional bake and roast section.
broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power • Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended in
the Broiling Guide.
Clock and timer The clock is in the • See the Settings section for the oven clock.
do not work or no clock mode.
display goes blank
Controls improperly set. • See the Using the clock and lower oven timer section.
A fuse in your home may be • Replace the fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.
