– 19 –
Store: Press key, then press “INT/OK” key to start the
NAME entry by keypad. Press “INT/OK” key to confirm. Select
the ring tone with or key. Press “INT/OK” key when
finish.
Note: 1. The CALL LOG icon and display indicator disappear
only after browsing through all the entries.
2. It is only possible to enter subscribers in the phone book who
has not stored before.
Edit Call Log memory
When browsing Call Log memory, Caller Line Identification (CLI)
number can be edited before dial back. Amended CLI number will
not overwrite the stored Call Log memory.
press [0-9] to add digits in front of CLI number.
Press [#] to remove entry or leftmost digit. (if number > 6 digits)
press or key can recover the original CLI number. .
Example :.
CLI number is 12345678
Press digit 1, display is 1 12345678
Press digit 2, display is 12 12345678
Press #, display is 12345678
Press digit 3, display is 3 12345678
Press #, display is 12345678
Press #, display is 2345678
Press #, display is 345678
(# key is no function if number is 6 or less digit )
If press
or key, display is 12345678
Muting the Microphone
Press key can switch the microphone on or off during a call
