StreetPilot 7200/7500 Owner’s Manual 53
APPENDIX
Updating the Software and Map Data
If you register your unit, you will receive notification of
software and map updates. To register your 7200/7500,
go to https://www.garmin.com/registration/selectreg.jsp.
To update the StreetPilot software:
1. Load the USB Drivers using the enclosed
CD-ROM. See page 20 for more information.
2. Connect the USB cable to your StreetPilot and
your computer.
3. Connect the AC Cable to the Power connector
on the right side of the StreetPilot. Turn on the
StreetPilot.
4. Touch
Garmin Mode.
5. Go to http://www.garmin.com/products/sp7500
for the 7500 or http://www.garmin.com/products/
sp7200 for the 7200. Select Updates and
Downloads.
6. Click
Download next to the unit software.
7. Read and agree to the terms. Click Download.
8. Select
Run (or Open). Your software is updated.
Check http://www.garmin.com/unlock/update.jsp to see
if an update for your map software is available.
Using a Remote GPS Antenna
Use an optional external remote GPS antenna (Garmin
GA 25) when using the unit in a vehicle with a coated
windshield or an in-screen heating system, which can
block GPS signals. Connect the antenna to the MCX
connector located on the back of the unit. To purchase,
go to the Garmin Web site at http://www.garmin.com/
products/sp7500 for the 7500 and http://www.garmin.
com/products/sp7200 for the 7200. Click Accessories.
