96/96C Owner’s Manual 11
BaSIc operatIon >
To select and start an on-screen button:
Use the ROCKER to highlight the on-screen
button, and press ENTER.
To enter data in a data eld:
1. Use the ROCKER highlight the data eld, and
press ENTER to start the eld.
2. Press up or down on the ROCKER to select
characters. Press right to move to the next
character eld or press left to move back to the
previous character eld. If there are two lines
of data, keep pressing right to drop down to
the next line.
To clear the entire data eld, move the cursor
to the left-most character eld and press left
once more on the ROCKER.
3. After entering the data, press ENTER to
conrm the change.
4. To save the waypoint and exit the New
Waypoint Page, highlight OK, and press
ENTER.
Or
To cancel the waypoint and exit the New
Waypoint Page, highlight DELETE, and press
ENTER.
Not all elds are programmable, such as the date and
time. When you are on a page with elds that are not
selectable, the cursor skips over them.
