47
Section 2
TAWS Operation
Figure 2-2: 120˚ Viewing Angle on the TAWS Page
Figure 2-3: Aviation Data
To display a 120˚ view:
1. Select the TAWS Page and press MENU. Select ‘View 120˚?’.
2. Press
ENT. The TAWS Page displays the 120˚ view
(Figure 2-2)
. To change to a 360˚ view, repeat step 1,
select ‘View 360˚?’, and press ENT.
Seven display ranges are available, allowing for a more complete view of the surrounding area.
To change the display range:
1. Select the TAWS Page and press up or down on the RNG key to select the desired range: 1 nm, 2 nm, 5
nm, 10 nm, 25 nm, 50 nm, 100 nm.
Aviation information such as airports, VORs, and other navaids can be turned on or off on the TAWS
Page (Figure 2-3).
To show or hide aviation information:
1. Press MENU.
2. Select ‘Show (or Hide) Aviation Data?’ and press
ENT. Pressing the CLR key when the TAWS Page is
displayed can also be used to toggle aviation information on or off.
