A SERVICE OF

logo

11
Pin No. Input signal Pin No. Input signal
1 Red 9
2 Green 10 Ground
3 Blue 11
4 12
5 Ground 13 Horizontal (H) synchronization
6 Ground 14 Vertical (V) synchronization
7 Ground 15
8 Ground Frame Ground
* Use the RGB synchronization switch to switch between TTL and ANALOG
depending on the types of horizontal (H) and vertical (V) synchronization signals
received through pins 13 and 14, respectively.
Pin No. Signal
1 DCD (Data Carrier Detect)
2 RD (Received Data)
3 TD (Transmit Data)
4 DTR (Data Terminal ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
RS-232C terminal (RS-232C)
Description of Input Terminals
RGB input terminal (RGB INPUT/mD-sub)