Fujitsu FI-486PRRE Manual

A SERVICE OF

next previous

9

2.3

̙Setting Imprinter

2

BASIC OPERATIONS

2.3 Setting Imprinter

You must do the following:

1) Click the [Option] button is from the main screen of the scanner driver [TWAIN

Driver].

2) Select the [Imprinter(Endosor)] tab.

The following screen is displayed.

3) Enable Imprinter. Setup the position of printing and the print string.

Refer to "FUJITSU TWAIN32 scanner driver User’s Guide" stored in the

scanner driver (CD-ROM) for the details of the setup.

4) Press [OK] button to confirm the setup.

5) Click the [Scan] button is from the main screen of the scanner driver [TWAIN

Driver] , the defined data is printed on the document.

HINT

When you want to setup the imprinter without using a scan-

ner driver.

Refer to “fi-4860C Operator’s Guide”,the section

” 7.3 Setup Mode Details”