Item Capacity
Ford Part Name or
Equivalent
Ford Part Number /
Ford Specification
Cooling system stop
leak pellets
—
Motorcraft Cooling
System Stop Leak Pellets
VC-6 /
WSS-M99B37-B6
Power steering fluid
Fill to between
MIN and MAX
lines on reservoir
Motorcraft MERCON
ATF
XT-2-QDX /
MERCON
Windshield washer fluid 5.1 quarts (4.8L)
Motorcraft Premium
Windshield Washer
Concentrate
ZC-32-A /
WSB-M8B16-A2
Fuel tank
14.0 gallons
(53.0L)
——
1
Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities
will vary based on vehicle application and transmission fluid cooling system (i.e. coolers size,
cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should
be set by the indication on the dipstick’s normal operating range.
The manual transmission service refill capacity is determined by filling the transaxle to the bottom
of the filler hole with the vehicle on a level surface.
2
Automatic transmissions that require MERCON V should only use MERCON V fluid or fluid that
is specified dual usage MERCON/ MERCON V. Refer to scheduled maintenance to determine
the correct service interval. Use of any fluid other than the recommended fluid may cause
transmission damage.
3
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
4
Add the coolant type originally equipped in your vehicle.
2007 Focus (foc)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
209
