assembly instructions
-15-
Step 9:
Cap the Pec Dec Pulley Block (15) with
two 2" x 3" Rect End Plugs (52). Attach
the Stoppers (58) to the Pec Dec Pulley
Block (15) using one 5/16" Inner Hex
Head Bolt (85) for each.
Attach the Pec Dec Pulley Block (15)
to the Pec Dec Base (6) using two 1/2"
x 5" Hex Head Bolts (69), four 1/2"
Washers (89) and two 1/2" Nylon Nuts
(93).
Cap the Adj Back (17) with one 1-3/4"
Sq End Plug (49). Attach the Seat /
Back Pad (31) to the Adj Back (17)
using two 3/8" x 1" Hex Head Bolts (81)
and two 3/8" Washers (90).
Insert the Adj Back (17) into the
horizontal tube on the Pec Dec Base
(6) and secure with the Quick Release
(64).
ASSEMBLY
