5-14 Commands
[Description] Selects the type of paper for printing, using
n
as follows:
ESC c 1
n
[Name] Select paper type(s) for command settings
[Format] ASCII ESC c 1
n
Hex 1B 63 31
n
Decimal279949
n
[Range] 1 ≤
n
≤ 4
[Description] Selects paper type(s) for use with various command settings.
ESC c 3
n
[Name] Select paper sensor(s) to output paper end signals
[Format] ASCII ESC c 3
n
Hex 1B 63 33
n
Decimal279951
n
[Range] 0 ≤
n
≤ 255
[Description] Selects the paper sensor(s) to output paper end signals
• This command is available only with a parallel interface and is
ignored with a serial interface.
Bit Off/On Hex Decimal Function
0
Off 00 0 Paper roll disabled.
On 01 1 Paper roll enabled.
1
Off 00 0 Paper roll disabled.
On 02 2 Paper roll enabled.
2
Off 00 0 Slip paper disabled.
On 04 4 Slip paper enabled.
3-7 - - - Undefined.
Bit Off/On Hex Decimal Function
0
Off 00 0 Paper roll disabled.
On 01 1 Paper roll enabled.
1
Off 00 0 Paper roll disabled.
On 02 2 Paper roll enabled.
2
Off 00 0 Slip paper disabled.
On 04 4 Slip paper enabled.
3-7 - - - Undefined.
